Does Your Swimming Pool Have Balanced Water?

A pool with clear water will oftentimes be an indication that the water is clean. For many of us, that will mean that the pool is safe to use. Add to this, however, it is also important to make sure that you have a pool with balanced water. This will be crucial to your family’s safety and health and is at the same time an assurance that your pool and all other pool equipment remains intact even with regular use. In order to know if your pool has balanced water, you have to take note of the following.

The pool water’s pH level

The pH level is an important indication of balanced water and a healthy pool. You need to have your water tested to know whether your pool has a very low pH or a very high one. When the test shows a figure lower than 7.2 then it means it is acidic. If it goes higher than 7.4 then it has high pH levels. You have to remember that an acidic water can result to metal corrosion in your pool equipment and can lead to algae growth. This will also allow for chlorine to dissipate faster thus causing bacteria growth in the water. A high pH, on the other hand, can result to scaling and cloudy water since this can affect the pool’s water filter. This will make it harder for the filter to remove any debris that goes into the water.

The pool water’s alkalinity

The total alkalinity affects the pH levels of the pool. It has to be within the range to make sure that there are no abrupt changes in the pH levels. Total Alkalinity (TA) that is within the required range will stabilise the pool’s pH level. When the TA is too low, expect metal corrosion and stains forming on the pool’s walls. Plaster walls can also get affected when this is the case. The worst is that the water can look murky and turn green which is an indication of algae growth. TA that is too high, on the one hand, will make chlorine lose its supposed role as a disinfectant and will result to cloudy water as well.

The use of stabilisers

In order to achieve balance in your pool’s water, you can have a stabiliser. The stabiliser will work when chlorine gets exposed to high temperatures and to the ultraviolet rays of the sun. This is that time when chlorine loses its capacity to disinfect pool water. The stabiliser will see to it that chlorine is prevented from possibilities of break down.

The pool’s calcium level

Just like total alkalinity and pH levels, calcium level has a role to play when it comes to determining if your pool water is balanced or not.  Corrosion and stain formation will take place with a water that is low in calcium. Meanwhile, scale formation and clogging of filtration equipment will happen if the calcium level is too high.

The amount of chlorine in the pool water

Chlorine plays a vital role when it comes to making sure that the pool water is safe to use. There is a minimum required amount of chlorine that can be used to disinfect the pool though. You will not want chlorine that is too low since it can lead to bacteria and algae growth. You will not want too much chlorine either as this can irritate the skin and eyes of those who will swim in the pool.

Total Dissolved Solids or TDS

Total alkalinity, pH levels, calcium and chlorine affect TDS in the pool. When the TDS is high, it will be difficult for chemicals to do their work thus resulting to stains in the pool. This will require regular pool maintenance and backwashing.

It is important to keep the pool water clean and maintain water balance at all times. Simply enlist the help of experts for pool cleaning in Maple Ridge to make sure your pool water is safe for swimming!